fbpx

pH & Total Alkalinity Test (50 strips)

30.00

These pH & alkalinity water test indicator strips are perfect to see to check the pH & alkalinity of your drinking & tap & bottled water.

Testing the pH of water is important:

  • Very low or very high pH can be an indicator of problems with water quality.
  • This is especially the case for private water supplies. If the pH is too high, then the disinfectant can not work properly. If a pH is too low, then water can be corrosive for metal parts, ie, lead from lead pipes can leach into water or metal parts can be damaged.
  • Tap water should have a pH of 6.5 to 9.5. Pure water should have a pH of approx 7.

A single test strip has been designed with two separate test pads: one for pH and the other for Total Alkalinity measurements. This test is also an alternative to wet chemical tests since it gives reproducible results for each test separately.

  • Simple Dip-Wait-Read Testing Method
  • Fast and accurate results
  • Test strips are stored in a plastic container to protect them
  • Ideal for quick and reliable testing of water
  • Accurate test results for each element are achieved less than one minute
  • This product is safe and easy to use since there are no chemicals to mix, an MSDS is not required

Suitable for: fresh water samples, including water from taps, wells, springs, boreholes, ponds, as well as rainwater

Content: 50 strips

Sensitivity: pH: 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 11.0
Total Alkalinity: 0, 40, 80, 120, 180, 240, 720 ppm (mg/l)

Description

How to Use:

  1.  Dip the Stick into water the water sample for 10 seconds without motion.
  2. Remove strip and immediately match colour of strip to the colour chart. Complete colour matching within 15 seconds.

Contains: 50 strips per bottle

Total Test time: 25 seconds

Please note: not suitable to test pool & spa water.

Please note: that this is a screening test and can not be used to certify water as safe or unsafe for drinking. It provides approximate results ONLY when used in strict accordance with instructions. safewater expressly disclaims any liability resulting from the use of this product, failure to follow instructions or reliance on test results. This is not a measuring instrument. Store in a cool, dry (below 32°C) place and away from excess heat and direct sunlight. No MSDS required. Keep away from children and pets. Avoid contact of test areas on strips with skin & eyes, do not ingest or expose to acids.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “pH & Total Alkalinity Test (50 strips)”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.